mineral water plant project, drinking water plant with professional technical support.

This series of lifting platform car meets most industrial requirements. 

Solid structure, high quality hydraulic cylinder, long service life, with overload relief valve. 

High load PU casters, 2 universal casters. Two fixed casters, universal casters with brake,

 all casters with protective equipment.

Best price with RO water treatment system for mineral water purification plant

Flow chart :
Raw water tank—raw water pump—multi-medium filter--active carbon filter –water softner 

(Sodium Ion Exchanger)—precision filter—RO mainframe(including chemical cleaning device)

—ozone generator—finished product water tank

First stage pre-treatment(Sand filter)

The use of multi-medium quartz sand filters, main purpose is to remove the water contains sediment,

 manganese, rust, colloid material, mechanical impurities, suspended solids and other particles in the above 

20UM of substances hazardous to health. The effluent turbidity is less than 0.5NTU, CODMN less than 1.5mg / L, 

iron content of less than 0.05mg / L, SDI less than or equal to 5. Water filter is a kind of "physical - chemical" process, 

the water through granular materials when isolated filter water impurities and colloidal suspensions.

Second stage pre-treatment (Carbon filter)

Activated carbon filters used to remove the pigment in the water, smell, 

a large number of chemical and biological organisms, reducing the residual value of water

 and pesticide pollution and other harmful pollutants. The structure of activated carbon filters 

and quartz sand filters, the difference is placed inside the strong adsorption capacity of activated 

carbon for removal by the quartz sand filter without the filter out organic material, adsorption of 

residual chlorine in the water, using water more than less than or equal to chlorine 0.1ML/M3, 

SDI less than or equal to 4, are strong oxidants chlorine, there are various types of membrane damage.

Third stage pre-treatment (Micron filter)

Particle size in water to remove fine particles, sand filters can remove very small colloidal particles 

in the water, so that the turbidity reached 1 degree, but still per milliliter of water for hundreds of thousands 

of particle size 1-5 microns colloidal particles, the pressure on this filter to remove water after the particle 

size of 100 microns or less in small particles, to further reduce the turbidity,

 to meet the next process of the water requirements of the protection of the next long-running processes.

RO system

Reverse osmosis membrane was only 0.001 micron pore size, can be harmful to 

remove dissolved solids and bacteria, viruses, etc., desalination rate of more than 99.6 percent, 

the host section contains the security filter, high-pressure pump and reverse osmosis membrane, 

security filters for the fourth grade and above pre-treatment systems, high-pressure pump 

is the host of one of the core equipment for the reverse osmosis membrane elements to 

provide sufficient pressure to overcome the penetration resistance to pressure and run to meet the needs 

of a device to achieve the rated water.